在橡膠制品生產的廢氣處理上，已經形成了些有效的處理方式，但由于處理方式不同，在處理的效果上與優缺點上也不相同。

Effective treatment methods have been developed for exhaust gas in rubber product production, but due to different treatment methods, the effectiveness and advantages and disadvantages of the treatment also vary.

1. 燃燒法具有較高的處理效率，可以一次處理濃度較大的廢氣，但是處理過程也需要大量燃料消耗，且必須連續進行，伴隨氮氧化物的排放，因此成本較高；

1. The combustion method has high processing efficiency and can treat high concentration exhaust gases at once, but the treatment process also requires a large amount of fuel consumption and must be carried out continuously, accompanied by the emission of nitrogen oxides, resulting in high costs;

2. 生物處理法能夠處理較低濃度的廢氣，并且具有低成本的優勢，但是在高濃度廢氣的處理效果上并不好，需要占用大量的空間，生物環境較難獲得，因此也不方便；

2. Biological treatment methods can treat lower concentrations of waste gas and have the advantage of low cost, but the treatment effect is not good for high concentration waste gas, requiring a large amount of space and difficult to obtain biological environments, making it inconvenient;

3. 活性炭吸附裝置，雖然經濟實用、應用廣泛，但是隨著各地檢查力度的加大，該設備越來越無法實現達標排放；

3. Activated carbon adsorption devices, although economically practical and widely used, are increasingly unable to achieve standard emissions with the increasing environmental inspections in various regions;

4. 光催化氧化技術，是一種在特定壓力和溫度條件下，運用紫外線光作為催化劑，將橡膠廢氣中的物質與（各類VOCs治理RTO、RCO、CO、冷凝器、噴淋塔、活性炭/樹脂/沸石吸脫附等設備廠家：樊13141458653微信同）空氣、氧氣等氧化劑物質進行氧化反應的處理工藝，該種方法與上述兩種方法相比具有明顯的優勢，它的處理效率很高，并且不需要較高的溫度條件，成本也比較低廉。它的缺點是除味、除臭效果明顯，但是無法凈化橡膠廢氣中的揮發性有機廢氣成分。

4. Photocatalytic oxidation technology is a treatment process that uses ultraviolet light as a catalyst under specific pressure and temperature conditions to oxidize substances in rubber exhaust gas with oxidants such as air and oxygen (professional equipment manufacturers for VOCs treatment RTO, RCO, CO, condenser, spray tower, activated carbon/resin/zeolite adsorption and desorption: Fan 13141458653 WeChat). This method has significant advantages over the above two methods, with high treatment efficiency, no need for high temperature conditions, and relatively low cost. Its disadvantage is that it has obvious deodorization and deodorizing effects, but it cannot purify the volatile organic waste gas components in rubber exhaust gas.

5. 等離子分解法，經過多年的工程實踐經驗，在治理揮發性有機廢氣方面效果顯著，且在占地空間、燃料消耗、二次污染物產生等多方面有明顯優勢，并且對廢氣成分和廢氣濃度的適應性較強，可以凈化橡膠制品工業中產生的煙氣、廢氣以及惡臭氣體，對橡膠制品工業產生的廢氣適用性強。

5. Plasma decomposition method, after years of engineering practice experience, has significant effects in the treatment of volatile organic waste gas, and has obvious advantages in terms of land occupation, fuel consumption, and secondary pollutant generation. It also has strong adaptability to the composition and concentration of waste gas, and can efficiently purify the smoke, waste gas, and odorous gases generated in the rubber products industry. It has strong applicability to the waste gas generated in the rubber products industry.